Acronis Uefi Boot

You can create a rescue bootable media - a standalone version of Acronis True Image that you can use to boot a crashed machine or a machine without any operating system and restore an image of your system.

Follow the instructions below to create a bootable media.

For instructions on how to create Acronis Survival Kit, see this article.

How to create Acronis Bootable Media on a Mac

In the Tools section, click Rescue Media Builder:. Choose media creation method:. Simple—This is the easiest option, suitable for most users. Acronis True Image will choose the optimal media type for your computer. If you use Windows 7 or a later version, WinRE-based media will be created. Otherwise, Acronis Media Builder will create a Linux-based media.

Advanced—This option allows you to choose a media type, therefore you can create the rescue media not only for your computer, but for a computer running a different Windows version.

Select a destination for the media:.

USB flash drive. ISO image file (you can burn the ISO image to CD/DVD separately).

WIM image file (available only for WinPE-based media). First, select the bootable media type: WinPE-based media or Linux-based media.

Using bootable media created with WinPE may provide better compatibility with your computer’s hardware because the preinstallation environment uses Windows drivers.

Select architecture and toolkit:. Select a toolkit that you want to be used for the rescue media creation.

Windows Recovery Environment is recommended, because it usually has all the drivers required for the successful hardware recognition.

In case of significant hardware upgrade scenarios, like a migration from old SATA HDD to a faster m.2 NVMe SSD you may need to add drivers for the new hardware on the next step of the Media Builder.

If the Windows Recovery Environment is missing or Acronis Media Builder is unable to detect it, choose the second or third option.

If you plan on using NMVe / M.2 / U.2 / RAID / PCIe, the second option (Windows 8, 8.1 and Windows 10) is preferred, even if the operating system inside the backup is still Windows 7, because here the operating system refers to the choice of the base of the bootable media, the small 'portable' OS that runs inside the bootable media, completely independent from the operating system inside the backup.

If you choose Windows AIK or Windows ADK and you do not have the selected kit installed on your computer, then you first need to download it from the Microsoft website, and then install the required components—Deployment Tools and Windows Preinstallation Environment (Windows PE).

For better compatibility with your hardware, you can select drivers to be added to the media.


  1. Because finding the right drivers can be time consuming, you can skip this step, finish creating a bootable media, try and boot the computer from it and see if the disks / network / NAS are detected successfully in the Recovery's "Browse" dialog window.
  2. When trying to boot the target machine from this media, you see the following message:

    Video mode setup error: Error 0x1480006: The video framebuffer parameters are invalid


If some hardware is not detected, re-create the bootable media, this time not skipping this step and adding the drivers.

Comments are closed.