Bmw Standard Tools 2.12

BMW Standard Tools is a Shareware software in the category Miscellaneous developed by BMW Group. It was checked for updates 251 times by the users of our client application UpdateStar during the last month.
The latest version of BMW Standard Tools is 2.12, released on 02/08/2022.
It was initially added to our database on 08/16/2008.
The most prevalent version is 2.12, which is used by 88 % of all installations.
BMW Standard Tools runs on the following operating systems: Android/iOS/Windows/Mac.
BMW Standard Tools has not been rated by our users yet.
Write a review for BMW Standard Tools!
251 users of UpdateStar had BMW Standard Tools installed last month.
» bmw standerd tools. » ecnfyjdrf bmw standart tools. » bmw stanard tools.
» bmw tools window. » bmw standard tools セットアップ.
» bmw tool32 下载. » standard tool bmw. » bmw standard tools install freeware. » bmw standard tools 2.20. 110-04-2013, 07:18 PM (This post was last modified: 08-03-2014, 05:36 AM by Bimmer.).
WinKFP, NCSExpert, INPA, Tool32, etc . Windows OS (including 7 and 8). x86 or x64 bit systems. I have not tested with MAC as I am not a MAC user but if anybody can post feedback for MAC it will be greatly appreciated by many members .
This is a base install of BMW Standard Tools 2.12.
INPA, WinKFP, and NCSExpert will be incomplete. After installation of BST 212 you will need to build from here.
Below are instructions I made up on the fly. If I made a mistake or missed a step or have something to add let me know and I will make the appropriate changes.
INPA 5.06 with Fxx:. BMW and MINI FULL SPDatens v51.2:. Links are directly to my Mega Server. Please be so kind to give a quick thanks and REP+ I would greatly appreciate it .
STEP 1: INSTALLING BMW STANDARD TOOLS. Download and install BST 212 from this thread. Since BST (BMW Standard Tools) was designed for Win XP 32bit operating systems users have faced issues with tools like WinKFP and NCSExpert since Win 7 64bit systems have been introduced. Running in XP compatibility mode just wasn't enough.
Presenting you with several errors or not running at all. Only solution was to install on a XP system or like me..
Well that all changed with BST 2.12 which works on 32 or 64bit systems.
WIN 7/8, 32/64bit OS. STEP 2: INSTALLING INPA(will need it after coding certain modules such as DME for CAS or EWS Alignment).
Download and install my version of INPA 5.06 with Fxx Support by simply replacing the existing folders with the folders provided in the INPA I send you (request by PM only):.
Replace C:\EC-Apps\INPA. Replace C:\EDIABAS. STEP 3: INSTALLING NCSEXPERT IN ENGLISH.
Download and install NCSEXPER32_ENG.zip attached to this post. Copy and replace contents in the .zip file with contents in C:\NCSEXPER\BIN. Now NSCExpert is in English but you will find the Hot Keys do not work. This is a bug a fellow MHH member discovered and haven't really worked on trying to fix it so for the time being just click on the F# key with your mouse.
Not done yet with NCSExpert.
Need to import profiles to NCSExpert. well download the PFL.zip and copy and replace all contents from PFL.zip to [b]C:\NCSExpert\PFL. (you will also find a lot more PFL's by searching for NCSExpert profiles in Google). Now you have a working WinKFP and NCSExpert with profiles loaded on your PC we can continue to Step 4.
STEP 4: INSTALLING & CONFIGURATING DCAN INPA CABLE.
Configure your DCAN/INPA cable.
If you followed my steps correctly than your EDIABAS should already be configured to STD:OBD for use with the INPA cable. If not you can download ediabas-konfigurator from here if it is not already in your C:\EDIABAS\Ediabas-Konfigurator folder. This tool allows you to easily change the ediabas.ini to your desired interface. So if you are switching from INPA to E-Sys you could use this to switch from STD:OBD to ENET.
Now to set your COM Port we must first find which COM port is being used for your cable. Connect your cable to your PC (some may require a 12v supply to power the cable).
Allow the device drivers to install (for best driver use the driver that came with your cable. If not then let windows install the best suitable driver for it).
Navigate to Control Panel, Device Manager, and scroll to Ports (COM & LPT).. So in my case it's COM5. So we need to change this in the obd.ini file located in the c:\ediabas\bin folder.
But first lets make some changes to the cable. Right click on your INPA cable driver for example mine is labelled "USB Serial Port" and click on properties. Now in the property window click on the advanced tab.
Now every driver is different but the important part is the settings such as latency timer and received and transmit bytes. See pic bellow for the ideal settings. You may also change the COM port number here as well for tutorial I left it at 5.
Once your changes are done we can proceed by clicking OK to accept the changes. No close all windows to return to the desktop.
STEP 5: CHANGING THE OBD.INI. Navigate to C:\EDIABAS\BIN and find file obd.ini and open it with an editor such as notepad. First 3 lines will look like this.. So we need to change the Port to reflect our INPA cable which in our case is COM port 5.
So change it to look like this.. When done click File -> Save and exit out. Very important to remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above.
Now to test if your cable installed correctly. Plug it into the vehicle's OBD port and open INPA. You should look like this..
If not follow the above steps again and correct your error.
STEP 6: SPDATEN FILES. Download and install SPDaten files of your choice (always recommend the latest) in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share.
Once downloaded you can now follow the instructions provided bellow labelled "How_to_start_WinKFP.pdf" this will explain how to import the SPDaten files to WinKFP.
For NCSExpert to install or update the daten files, copy the files from SP-daten-E##\daten to the C:\NCSEXPER\DATEN\E##\ (where E## is whatever chassis you're updating).
You will also want to copy the files from SP-daten-E##\SGDAT to C:\NCSEXPER\SGDAT (they're not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory.
Overwrite everything it asks about).
Then copy the files from SP-daten-E##\ECU to C:\EDIABAS\ECU.

What you need before installing BMW Standard Tool

Comments are closed.