Fgtech Galletto 4

Latest Version V54 FGTech Galletto 4 Master BDM-TriCore-OBD Function. Get it now for 5 reasons:. Latest FGTech Galleto: 2014 V54. Support windows XP. more friendly than Fgtech v53 , much easier to operate. Unlock version , can use directly, no need to activate by us.

FGTech V54 Language: English, Italian, German, French, Spanish, Portuguese, Czech, Turkish.

fgtech galletto 4-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone.

Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode Tricore, checksum.

Boot Mode System TriCore:. Infineon Tricore Sak TC1766. Infineon Tricore Sak TC1792.

Infineon Tricore Sak TC1797. NEW JTAG – BDM – MOTOROLA – FREESCALE – INFINEON. Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 – Mair 8GMF.

Motorola Freescale MPC 555/556/561/562/563/564/565. Motorola MC 68332 – MC YQQCU – MC 68377 Trionic 5/7/8 GM-OPEL-SAAB.

Motorola MC 68336 MEMS D5 ROVER. New Line OBD protocols VPM GM – Hummer-Corvette-Munstang-Blazer-Cadilac. New Line OBD protocols Tx-Rx – Subaru – Mitsubischi – Hitachi – Denso ecu. All EDC17 MED17 is good always modify with Boot Mode tricore.

Automatic Checksum:. All old protocols included from Bosch MExx / EDCxx / Marelli / Siemens / Delpy / Lucas / Denso. Boot Mode C167x / ST10, Boot Mode Infineon Tricore With password Bosch , Siemens.

Motorola MC68332 – MCYQQCU – MC68377 , MC68376 , MC68336, ZC439615 ,ZC439507.

Motorola Freescale MPC 555/556/561/562/563/564/565. 5-30V Car / Industrial Vehicles, L line / K line KWP, CAN. J1850 VPW PWM GM -FORD. Automatic setup Pull up K-L line 250, 500, 1000 ohm,. Automatic setup termination Can bus 0, 60,120 ohm,. Master Version:. Recovery Mode Completa. Function scan tool for erase the DTC.

Controllo tensione di batteria auto in tempo reale. 1pc x ECU cable for TriCore boot. 3pcs x BDM adapters.

2pcs x Power cable. 1pc x USB cable (1.5meter). 1pc x CD (2012 version SW -MASTER, documents pdf, pictures, etc.).

V54 FGTech Galletto 4 FAQ, How FGTech Galletto 4 Flash VAG Bosch EDC16U34 ECU via BD. Q: FGTech Galletto 4 can cancel EGR gestion by OBD? A: Sorry, at present it still can not do this function, it just can read and write ECU data.

Q: Can Fgtech V53 update directly to Fgtech Galletto 4? and use Fgtech Galletto 4 software?

A: Sorry, it can not update directly.

If you want fgtech v54, you need to buy new fgtech.

Q: Can Fgtech V54 do this ecu Bosch EDC16 BMW(P3)?

Q: Can I buy laptop together, and you install it for me ready to use?

A: Yes it's ok, you can buy FGTech V54 together with Dell D630 laptop.

And we will install the software on Dell Laptoo for you before shipment.

Q: DVD INSTALLAZION ?????? PC generic oder DELL ? It need the windows xp , for the computer don't limit for use the DELL.

Multi-language FGTech Galletto V54 is the fastest and most secure chip tuning tool supporting wide range of vehicles, including car, Truck and Motorbike, even Marine, BDM MPCxx and checksum.

  1. What’ more, V54 FGTech features User-friendly and No Activation Needed. Supported OS: A laptop running Win XP home (without any anti-virus software and internet/network connection).
  1. Guide for you to flash VAG Bosch EDC16U34 ECU:. Install the V54 FGTech Galletto 4 Master Software; Video for Installation Reference: https://www.youtube.com/watch?v=R0gpO0wAxZw.
  1. Hook up V54 FGTech ECU tuning kit to PC/Laptop, setup boot and BDM. Find out the BDM pads showed at following picture; 4. Carefully align with the BDM Port ECU programming spring adapter/probe drop and secure frame. Kindly Note: Confirm all is connected correctly;. Run FGTech V54 software, accept the system notice.Kindly Note: Make sure you have 12V+ feeding FGTECH 4 master main device and the intermediate adapter.
  1. Turn intermediate adapter to ON, the read LED indicator will flash;. Click the Option list as the order: “Select Driver” >> “BMD-Jtag” >> “Connect”;. If communication between FGTech Galletto 4-Master V54 and PC/Laptop is well built, green bar will start loading and finally display ECU information.
  1. Ready to read and write ECU. Choose “Read EEPROM” to read EEPROM via system prompts, and then select “Write Eeprom”; once ok, turn the switch off.
  1. Exit FGTech V54 software program. Tutorial: FgTech 4 firmware 0475 Galletto V54 FREE download and Windows 7 install. FgTech 4 firmware 0475 Galletto v54 download link:.
  1. Password: cooked2017. You have to know: the galletto v54 link above only tested successfully with the new fgtech 4 firmware 0475.

you’re not advised to try it with the old fgtech – HIGH RISK!!!!!!!!

you have to try it at your own risk and no one hold any responsibility!

Operating system:. The new FW 0475 EU version supports:.

Windows 7 32bit and 64bit.

Note: The old FGTECH 4 firmware 0386 can only work well with Windows XP.

Installation tutorial: Galletto V54 Windows 7: Confirmed!

Network: available. you can use it with network connected!

Anti-virus software: closed! please close all anti-virus sw on your PC before install!

Steps to install Gellatto V54 for Fgtech 4 clone fw 0475:.

step 1: run v55 for 0475 all win.EXE. step 2: copy Evo.dll and mfc42.dll to C:/Program Files/fgtech v54 – win 7. This is for your information. FGTECH 4 FW 0475 EU version is unlocked and you can use it onlineFW 0378 must disconnect the Internet when using FGTECH 4 0475.

fgtech 4 fw 0475 has been tested successfully on many cars and ecus:.

1.) EDC16U34 (03G 906 021 PD) via obd2 r/w caddy 2010 1.9tdi. 2.) Z10XE Opel Corsa 1.0 (ME1.5.5) on the bench r/w.

3.) Z18XE Opel Zafira Simtec 90 71.1 r/w (24kb file!!!) on the bench.

4.) Fiat Stilo 1.6 16v 2001y ecu 5NF.T1 via OBD2, on the bench via K line r/w. 5.) Land Rover 2.0 td4 diesel DDE4 Bosch r/w via OBD2. 6.) EDC16U1 r/w via OBD2 Touran 1.9TDi, Seat Altea 1.9 tdi.

7.) Delphy DCM3.4 Pezo 308 2.0 HDi 2007 via OBD2 (W not tested, just R). 8.) EDC16C3 via OBD2 ok, full BDM on the bench r/w (grand vitara 1.9DDiS, 2007).

9.) EDC15 PD 1.9 passat via OBD2 r/w. 10.) EDC15C2 Peugeot 406 restyl 2.0 HDI 2004 via OBD2 r/w.

11.) EDC15C7 r/w via OBD2 Fiat Marea 1.9 JTD 2002god. 12.) EDC17CP14 Audi A4 2.0 tdi 2009y (03L 906 019 AL, 03L 906 022 KC) r/w on the bench boot.

13.) Sagem S3000 on the bench read Jtag renesans.

14.) Astra G via obd read Delco 1.7 isuzu. 15)This is a very nice version without all the hassle others typically have.

Works fine with 0475 tool in Windows 7 x64. 16)Work very well Sp3 , I have Dell D530 Windovs XP 3 working O.K.

Good to know: FgTech 4 firmware 0475 NEW features. FGTECH 4 FW 0475 EU version has been improved a lot in the PCB.

fgtech 4 firmware 0475 inner board. source: http://www.cardiagtool.co.uk/fgtech-galletto-4-master-0475-eu-version.html. Original components used:.

The board comes with original FR232 USB bridge and relays.

Old components fixed: more stable: . FGTECH 4 FW 0475 EU version fixed all unstable problems and errors which FW 0386 had. The engineers have corrected MCU, EEPROM , Relay, Resistance, Led, Solder, Pin, Capacitor.

New components added: Tricore supported. FGTECH 4 FW 0475 EU version adds new components, best usb bridge and relays.

Work well with OBD / BDM / Boot / Tricore,. But FW 0386 is not good at Tricore. New ECUs and protocols:. 11/12OBD driver SSang-yong Del-phy DCM3.7 Read/Write, Checksum. 11/12OBD driver for Fer-rari 458 Italia MED9.6 Ecu Master and ECU Slave Read/Write, Checksum.

10/12OBD driver for Fi-at/Al-fa/Lan-cia Twi-nair/Mult-iair 8GMF and 8GSF Read/Write, Checksum. 10/12OBD driver for Ma-zda 5, Ma-zda 6 2.0 Diesel ECU RF8x Read/Write, Checksum. 10/12OBD driver for Ma-zda 5, Ma-zda 6 2.0 Diesel ECU RF7x Read/Write, Checksum. 09/12OBD driver for Sim-os 10.xx VA-G 1.2 TSI Read/Write, Checksum. 09/12OBD driver for CRD 3.xx Merc-edes 2200 CDI Read/Write, Checksum.

09/12Simos PCR2.1 VA-G 1.6 TDI Unlock Boot Tool – Read/Write EEPROM.

Comments are closed.