Midi Controller Serato

Serato Studio allows for both third-party MIDI devices and specific Serato DJ supported devices to be used, to control features and functions of the software. When connected and enabled, these devices will activate a pre-configured mapping. To get started with your MIDI device, connect it, then navigate to Setup > MIDI >MIDI Devices, and enable the toggle:.

3. Is it time to get a new midi controller for serato scratch live

Below is a list of Serato-compatible hardware that Serato Studio includes default mappings for:.

Pioneer DDJ-SB2. Pioneer DDJ-SB3. Pioneer DDJ-SZ2. Pioneer DDJ-SX2. Pioneer DDJ-SX3. Pioneer DDJ-SR2. Pioneer DDJ-SP1. Pioneer DDJ-REV1. Pioneer DDJ-1000SRT. Numark Mixtrack Platinum. Numark Mixtrack Pro 2. Numark Mixtrack Pro 3. Numark Party Mix. Numark Party Mix Pro. Denon DJ MCX8000. You can download two guides for mapping for both a controller and mixer, which while not specific to the devices above, should cover most of the functionality & mapping from the devices above.

4. What is the midi controller for serato scratch live?

The Akai MPK Mini MKII, Akai MPK Mini MKII (Special Edition), and Akai MPK Mini MK3 are mapped to work with Serato Studio.

You can download the Akai MPK Mini MKII & MK3 hardware guide below:. All other third-party non Serato-compatible MIDI devices should work with Serato Studio, however the pre-configured mapping may differ between third-party devices.

Many devices can connect to a computer using MIDI over USB, and will either be supported directly by your operating system or require an installation of drivers.

Follow the manufacturer's instructions for installation. Older controllers may use a MIDI out connector to send control messages, and will require a separate MIDI interface unit to communicate to software.

Generally, the MIDI interface will come with drivers and configuration tools which pass your controller's output onto an available MIDI channel, which can be used by Serato DJ.

Comments are closed.