How do I tether my phone on Windows 10? USB tethering not working on Windows 10? You can share your phone’s mobile data with another device, like your laptop, through tethering. It makes your laptop be able to connect to the Internet when there’s no network connection. There are three types of tethering: USB tethering, Wi-Fi tethering, Bluetooth tethering. USB tethering has the fastest speed among the three ones. It requires a USB cable to connect your laptop with your phone.
Update NDIS DriverBut at the same time, it makes your phone suck power from your laptop’s USB port instead of draining. Whether it will cost your money or not, it depends on your carrier. In the US, most carriers do charge. You can consult your carrier’s website for further information. If you use a third-party tethering app, it’s possible to be free to use USB tethering. But even that, sometimes your carrier can still detect your tethering. Then you might have to pay. It’s very easy to tether your phone on Windows 10, do these:. 1) Connect your phone with your Windows 10 through a compatible USB cable. 2) Tap Settings on your phone. 3) Tap More networks > Tethering and portable hotspot. Note: You may also find the tethering option under the Mobile Data or Personal Hotspot sections based on different phones. 4) Tap to check USB tethering. 5) If your Windows 10 is in a no wired and no wireless network place, it should then be used this network adapter automatically: Remote NDIS based Internet Sharing Device. It’s your USB tethering connection in the Windows 10. If you see Enabled on it, the tethering is successful. You’re able to access the Internet on your Windows 10. When the USB tethering stops working on your Windows 10, probably the USB tethering driver on your computer is corrupted, old or missing. Replacing the driver with the built-in one on your Windows 10 manually, or updating your USB tethering driver via Driver Easy automatically, these two methods can always help you solve the problem. If you are not confident playing around with the drivers manually, or you don’t have the time or patience, we highly recommend you to use Driver Easy to help you solve the driver problem automatically. Update your USB tethering driver via Driver Easy automatically [RECOMMENDED]. Replace the driver with the built-in one on your Windows 10 manually. Driver Easyis a very helpful and credible driver tool. It will automatically recognize Windows 10 or any other version of Windows system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):. 1)Downloadand install Driver Easy. 2) Run Driver Easy and clickScan Nowbutton. Driver Easy will then scan your computer and detect any problem drivers. 3) Click the Update button next to a flagged driver to automatically download and install the correct version of this driver (you can do this with the FREE version). Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All). 4) Restart your laptop. Then check to see if you can access the Internet on your Windows 10 via USB tethering. 1) On your keyboard, press Windows logo key and X at the same time to invoke the quick access menu. 2) Click Device Manager. 3) Expand Network adapters and right-click Remote NDIS based Internet Sharing Device. Then click Update driver. 4) Click Browse my computer for driver software. 5) Click Let me pick from a list of device drivers on my computer. 6) Click the small box beside the Show compatible hardware. Note: It’s ticked on by default. When you click it, it will get blank. 7) Wait for a few seconds, you should then see the screen shown below. Select Microsoft > USB RNDIS6 Adapter. Then click Next. Wait for a while, Microsoft will install the driver for you. Then you should see this screen . Check to see if you can access the Internet on your Windows 10 via USB tethering. If the traditional ways to enable the network connection on Windows are available, you can use USB Tethering instead. MiniTool Software shows you how to set up USB Tethering and how to troubleshoot USB Tethering on Windows 10 in this post. USB Tethering allows you to share your phone’s mobile data with other Wifi-enabled devices including the laptop. Then other devices can surf the internet. Tethering is similar to Wi-Fi Tethering. It will be useful if you don’t have other ways to connect the internet. Do you really understand USB Tethering? If you don’t understand, let’s change another way to make an explanation. Usually, you use the network cable or Wi-Fi adapter to connect your laptop to the internet. But, if you can’t access the network connection using these two ways, you can USB Tethering instead to allow the network connection. Unlike Wi-Fi tethering, USB Tethering works through the USB connection. You can consider USB Tethering as an Ethernet connection. But, it is much faster than Wifi tethering and even Bluetooth tethering. Usually, USB Tethering is free unless your carrier has blocked it. If you are sure it is allowed by your carrier, you still need to set up USB Tethering on Windows. In this post, we will show you how to set up USB Tethering on Windows 10. USB port not working? No matter you are using Windows 10/8/7 or Mac, you can read this article to find a proper solution to fix this issue. The way to make such a setup is quite simple. You can follow these steps:. Connect your phone to your PC with a USB cable. If your phone asks you to enable the File Transfer feature on the screen, you need to cancel it. When you see the prompt like Tethering or Hotspot active - Tap to set up on your phone screen, just tap the option to continue. But, if you don’t see this prompt, you need to go to Settings > Network and Internet > Hotspot and tethering to manually enable USB Tethering. A new network adapter will be created in Windows 10 and your computer will use it to connect to the internet. When you access Network settings on your computer, you need to make sure that the Wi-Fi feature is disabled on your phone. Otherwise, USB Tethering will be disabled if your phone is connected to an existing network. Here, you need to know that the exact location of USB Tethering may be different on different brands of phones. But, it is always clubbed with the Mobile and Data Network section. Do you know how to fix the Android file transfer not working or responding issue? In this post, we collect some solutions that are proved to be effective. Windows 10 is using the Remote NDIS based Internet Sharing Device network adapter to enable USB Tethering on Windows 10. If your USB Tethering is not working suddenly, you can do these things:. Check whether the Wi-Fi connection is connected automatically. If so, disable it. Check whether the USB cable is disconnected. Check whether the USB Tethering is accidentally turned off. If USB Tethering is still not working after these basic checks, you can enter Device Manager to update the NDIS driver to have a try. Press Win + X + M at the same time to open Device Manager. Unfold Network adapter. Right-click Remote NDIS Compatible Device and select Update driver. Then, you can go to check whether there is an available update. If yes, you can follow the guide to update it.