Thermo-Dynamics Boiler Company has been manufacturing heating equipment since 1932 in Schuylkill Haven, Pennsylvania.
The plant is a modern 88,000 square foot manufacturing facility. Automation and the use of computerized equipment give Thermo-Dynamics the ability to produce 22,000 units a year on one work shift. Due to the efficiency and capacity of the plant, Thermo-Dynamics also has produced boilers for several other steel boilers manufacturers.
Thermo-Dynamics is an “ASME code shop”. The American Society of Mechanical Engineers sets guidelines for construction and testing of all boilers to maintain the quality of construction and overall safety of units produced. Not only does ASME periodically inspect the manufacturing guidelines, but also, an inspector from an independent insurance company commissioned by ‘The National Board’ visually inspects each boiler on line as it undergoes hydrostatic pressure tests, as well as monitoring total production quality.
Thermo-Dynamics boilers are tested and capacity rated by the Institute of Boiler and Radiation Manufacturers (IBR). This agency certifies the validity of the published AFUE ratings. The advantage for the consumer is knowing that an outside agency verified the efficiencies published by the boiler manufacturer for each boiler. These ratings are listed in both the GAMA and IBR directories.
Following are some of the many reasons Thermo-Dynamics has been a leader in the steel boiler market for so many years:
-Thermo-Dynamics is a leader in the boiler market with such built-in features as: extended flange coil with replaceable carriage bolts; welded fittings that extend beyond the jacket; and built-in “air scoop” for quiet hydronic operation.
-All Thermo-Dynamics boilers are equipped with an “Installer/ Serviceman” label in addition to the standard rating label. This label is a permanent reference for future service technicians.
-Thermo-Dynamics purchases American-made steel. Each boiler can be traced back to the individual flat steel plates to verify chemical and physical properties of the steel.
-Thermo-Dynamics offers an exceptional Lifetime Limited Warranty. If a boiler should fail, the homeowner never pays more than 50% of the replacement boiler list price.
-Thermo-Dynamics offers a broad range of boilers: vertical tube dry-base, wet-base horizontal tube, zero clearance wet-leg, low-mass (both oil and gas-fired), oil-fired direct vent, outside boilers and swimming pool heaters.
-Thermo-Dynamics manufactures boilers with efficiencies from 83% to 87% AFUE.
-Thermo-Dynamics boilers are easy to clean and service, increasing the life and maintaining their efficiency.
-Thermo-Dynamics boilers all have excellent boiler water content. Domestic coils are placed in the top of the boiler for greater efficiency. The one-piece boiler construction insures good water circulation without the use of push nipples or O-rings to leak.
-Thermo-Dynamics offers several models of forced draft, pressure fired boilers utilizing state-of-the-art burner technology. The forced draft design allows proper combustion despite poor chimney draft conditions. The forced draft-pressure firing design seals combustion gases and odors inside the boiler and venting system, thereby reducing the chance of costly ‘puff-back’ problems.
-Thermo Dynamics has been the Leader in Pioneering sidewall direct venting without the use of power ventors.